Features & Specifications
High-speed Mobile Wireless Communication
• Embedded high performance 4G/LTE module*1
• High performance external antenna
Embedded 4G/LTE *1
• Supported frequency bands: (4G/LTE)
LTE-FDD: B1(2100MHz), B3(1800MHz),
B5(850MHz), B7(2600MHz),
B8(900MHz), B20(800MHz),
B28(700MHz)
LTE-TDD: B38(2600MHz), B40(2300MHz),
B41(2500MHz)
• Supported data rate: (4G/LTE)
LTE-FDD: Max 300Mbps (DL) Max 50Mbps (UL)
LTE-TDD: Max 226Mbps (DL) Max 28Mbps (UL)
• Downlink MIMO support
Network Protocols and Features
• Dual WAN Failover/ Failback
• IPv4, IPv6, IPv4/IPv6 dual stack*2
• Dual APN*2
• Keep Alive
• IP Pass-Through
• NAT, Virtual Server and DMZ
• Static Routing, Dynamic Routing (RIP v1/v2, OSPF, BGP)
• SNTP, DNS relay and DDNS
• Universal Plug and Play (UPnP) compliant
• Supports DHCP server/ client/ relay
Firewall
• Built-in NAT Firewall
• Stateful Packet Inspection (SPI)
• Prevents DoS attacks including Land Attack, Ping of Death, etc.
• Access Control
• IP Filtering, MAC Filtering, URL Filtering
• VPN pass-through
Virtual Private Network
• IPSec
• PPTP
• L2TP
• GRE
• OpenVPN
Wireless LAN
• IEEE 802.11a/b/g/n/ac compliant
• Concurrent dual-band 802.11a/n/ac(5GHz) and 802.11b/g/n(2.4GHz)
• Up to 1733Mbps wireless operation rate at 5GHz
• Up to 600Mbps wireless operation rate at 2.4GHz
• 64/128 bits WEP supported for encryption
• Wireless security with WPA-PSK, WPA2-PSK, Mixed WPA/WPA2-PSK
• WPS (Wi-Fi Protected Setup) for easy setup
• Multiple wireless SSIDs
• Wireless MAC Filtering
• Wireless Client Isolation
• Supports WDS repeater function
USB Applications Server
• Storage/NAS: FTP server, SAMBA server
Management
• Password protection for system management
• Quick installation wizard
• Web-based GUI for remote and local management
• Firmware upgrades and configuration data upload and download via Web-based GUI
• TR-069 (CWMP)*2, SNMP
• 3G/ 4G LTE Usage Allowance
• Syslog monitoring
• Physical layer/protocol diagnostic test tool
• Scheduling Auto-Reboot
Hardware Specifications
Physical Interface
• Two (2) detachable high performance 4G LTE antennas
• Two (2) detachable 5GHz & 2.4GHz antennas
• Two (2) internal 5GHz & 2.4GHz antennas
• Four (4) Gigabit Ethernet auto-crossover (MDI/MDI-X) switch
• One (1) USB 2.0 host type A
• Two (2) 2FF mini-SIM slot (BiPAC 4520AZ R3)
• One (1) 2FF mini-SIM slot (BiPAC 4500AZ R3)
• Factory default reset button
• Wireless on/off and WPS push button
• Power jack for DC input
Physical Specifications
• Dimensions: 9.04″ x 6.10″ x 1.69″
(229.5 mm x 155 mm x 43 mm)
Power Requirements
• DC power input: 15V DC, 1.6A
Operating Environment
• Operating temperature: 0°C ~ 40 °C
• Storage temperature: -20°C ~ 70 °C
• Humidity: 20% – 95% non-condensing
Notes:
1. The 4G LTE is dependent on your local service provider.
2. Only upon request for Telco/ ISP tender projects.
3. Specifications in this datasheet are subject to change without prior notice